 X600F
Amplificador de potencia de 4 canales
| 剛力 Gouriki son caracteres Japoneses Kanji simbolizan la palabra "Poder". Es un caracter que refleja rigidez y fuerza.El X600F entrega una reprodución musical clara y balanceada de musidelivers clear, balanced gracias al circuito de salida K-STAT, exclusivo de Kenwood diseñado especialmente para reproduciónd e música. | |
| |
| • | Transistores K-STAT | | • | Control Bass Boost : 40-100Hz, 0dB-18dB | | • | Filtro Variable Pasa Bajo: 50-200Hz, -24dB/oct | | • | Filtro Variable Pasa Alto: 50-200Hz, -24dB/oct | | • | Fuente de Poder Por Conmutación MOSFET | | • | eXcelon X-SERIES | | • | Amplificador Clase AB de 4 canales | | • | Circuito de Salida K-STAT | |
| |
| Salida de poder(14.4V): | | • | 100W RMS x 4 @ 4Ω | | • | (20Hz-20kHz @ 0.05%THD) | | • | 150W RMS x 4 @ 2Ω | | • | (1kHz @ 0.5% THD) | | • | 300W RMS x 2 @ 2Ω (Bridged) | | • | (1kHz @ 0.5% THD) | |
| | Dimensiones: | | • | Width: 14-15/16” (380mm) | | • | Height: 2-5/8” (66mm) | | • | Depth: 11-1/4” (286mm) | | • | Weight: 10.8 lbs. (4.9Kg) | |
| |
| MOSFETS(metal oxide semiconductor field effect transistors). Resulta de incrementar el control de manejo y habilitar el manejo la impedancia alta y baja. Mejor calidad de sonido y alta salida! | |
| |
| Muchos amplificadores tienen alta distorcion cuando se prenden por primera vez y les toma un tiempo llevar la temperatura a un nivel óptimo. K-STAT™ es una tecnología especializada de audio, exclusiva de Kenwood que utiliza un transistor integra al cuircuito para asegurar que el amplificador se ajuste basado en cualquier cambio de la temperatura. Este nuevo diseño resulta en menor distorción asi cuando se enciende el amplificador y cuando está entregando su máximo poder, la distorción es reducida. power for improved sound quality. | |
|
|
| Maximum Output Power | 800 Watts | | RMS Power Output | 70 Watts × 4 (1%THD+N) (4Ω) | | Signal-to-Noise Ratio | 105dB
83dBA (Ref: 1 Watt into 4 ) | | Amplifier Type | Class-AB | | Band Reject Filter | - | | Band Reject Filter Frequency | - | | Bass Boost Circuit | - 18 dB (Variable) | | Bass Boost Frequency | 40 - 100 Hz(Variable) | | Channel Design | 4-Channel | | Cooling System | Silent Fans | | Current Consumption | 47A | | Delay Control | - | | Frequency BAND 1 (Front, Rear) | - | | Frequency BAND 2 (Front, Rear) | - | | Frequency BAND 3 (Front, Rear) | - | | Frequency BAND 4 (Front, Rear) | - | | Frequency BAND 5 (Front, Rear) | - | | Frequency Response | 5K - 70Hz | | Gain (Boost or Cut) | - | | High-Pass Filter Frequency (-24 / -12 dB/oct.) | Low Range40-200Hz (Variable)
High Range40-200Hz (Variable) | | Input Impedance | 10k | | Inputs | 2 x RCA | | Installation Size (W x H x D) | 14-15/16" x 2-9/16" x 11-1/4"
380 mm x 65 mm x 286 mm | | Internal Memory | - | | LED Information Display | Voltage, Current, Temperature | | Low-Pass Filter Frequency (-24 / -12 dB/oct.) | Low Range40-200Hz (Variable)
High Range40-200Hz (Variable) | | Operating Voltage | 14.4 V (11 - 16 V Allowable) | | Output | 1-channel RCA | | Phase Inverter | - | | Power Supply | Single Power Supply | | Power Wire Gauge | 4-Gauge | | Quality Factor BAND 1 - BAND 3 | - | | Quality Factor BAND 4 - BAND 5 | - | | Rated Output Power | Rated Power Output(12.0V)
4Ω 45W x 4
2Ω 65W x 4
Bridged4Ω 120W x 2
1Ω -W x -
Rated Power Output(14.0V)
4Ω 70W x 4
2Ω 100W x 4
Bridged 4Ω 200W x 2
1Ω -W x - | | Remote Bass Control | - | | Sensitivity | 0.2V - 5.0V | | Speaker Wire Gauge | 12-Gauge | | Terminal Layout | One-Sided | | Weight | 10.1 lbs (4.6 kg) | | Installer Memory |  | | Protection Circuit | Yes | | Signal Sensing Turn On | No | | WARRANTY | 2 - Year Parts & Labor |
|
|